Skip to main content
PortaPro, home page
Septic and grease

Septic company software: what it should do for a pumping business

Septic is the one trade where the customer owns the equipment, it never moves, and it comes due on a cycle measured in years. Here is what software for a pumping company has to handle, and how to test it.

November 5, 20264 min read

Most field service software is built around the thing the company owns: the unit, the truck, the tool. Septic breaks that. The tank belongs to the homeowner, it stays at that address forever, and the business is remembering to come back before it fails. Software that has nowhere to put the tank leaves it in a note, the due date in a spreadsheet and the county form in a folder in the truck.

This is a list of what septic company software should do, in the order it matters to a pumping business, with a test for each one you can run on a demo.

Keep the tank on the customer's record

The tank is the thing you service, so it needs its own record on the customer's site: its size, what it is (septic tank, grease trap, holding tank, pump chamber), its serial, when it went in and when it was last pumped. Two tanks at one address are two records sharing one household.

Test: ask to add a second tank at an existing customer's address and see whether it gets its own size and due date.

Predict when it comes due

The trade's starting point is the Penn State Extension pumping-frequency chart: tank size against the number of people in the house. Our post on how often a septic tank should be pumped explains it and the adjustments for usage. Software should start from the chart, let the gallons your drivers record correct it over time, and let you override it with your own cadence, and it should say on screen why the date is what it is so the office can explain it to the homeowner.

Test: enter a tank with no history and ask where its due date came from. "The system calculated it" is not an answer.

Remind the homeowner, not just the office

A due date only books a job if somebody tells the homeowner. The useful version is a reminder program homeowners can join from your website, with reminders that go out ahead of the due date and move by themselves the day you pump. Our post on running a septic reminder program covers how to set one up.

The pumping report and the manifest

The technician's report is your record of the job and, often, the document a regulator asks for. It should cover the tank and access, liquid level, scum and sludge, the baffles, gallons pumped, condition and recommended repairs, and the disposal manifest: hauler, permit number, manifest or ticket number and receiving facility. It should work with no signal and save the homeowner's signature and photos with the time and location.

Test: ask whether the pumping, inspection, grease trap and holding tank reports come with the software or whether you build them, and whether you can edit them.

Your county's form, filled from the job

Many health districts want their own form, not yours. The best software lets you upload the county's PDF once, place the fields on it and bind them to the job: owner, address, tank size, gallons removed, receiving facility and technician. What comes out is the county's document. Licensing and forms vary by state; our post on septic pumper license requirements and the state regulation pages show where to look.

Bill by the gallon or by the job

Some pumpers charge a flat rate per pump-out, some charge per gallon, and grease trap accounts are often a contracted cycle. Software should handle all three, and per-gallon billing should come from the gallons recorded on the report, not from a number typed again in the office.

Routes that know the truck has a tank

A vacuum truck fills up. After a few tanks it has to go to a disposal site, which has its own hours, before the next stop. Route planning that ignores that sends the truck to a fourth tank it cannot take. Our post on route planning around the tank explains what the routing needs to know.

Grease traps and holding tanks in the same place

Most septic companies also pump grease traps and holding tanks. Each needs its own report (a grease trap report measures how full the trap is against the 25 percent rule) and its own cadence, but on the same customer, route and invoice.

What to bring to the demo

Take five real customers to the demo: one with two tanks, one with no known tank size, one grease trap account, one that needs a county form and one you bill per gallon. If you are comparing named products, our PortaPro vs Tank Track page puts two septic tools side by side with sources.

Questions this post answers

What is the most important thing septic software does?

Keep the tank on the customer's record with a due date you can trust. Every other feature, reminders, routing, the report, depends on knowing which tanks are coming due and why.

Can septic software fill my county's inspection form?

Some can. Look for software that lets you upload the county's own PDF once, place the fields and fill them from the job, so what you file is the county's document and not a lookalike.

We pump septic and rent portable toilets. Do we need two systems?

Not if the software keeps the two apart properly: a portable toilet is your unit that moves between sites, a septic tank is the customer's equipment that never moves. One customer, site, route and invoice can carry both.

See it on your own book.

Book a walkthrough with your own sites, units and billing cycle, or start a free trial and import your customer list tonight.

Start free trial

14-day free trial (card required, no charge today). Or a guided 30 to 60 day trial with no card.

Kygo, PortaPro's support assistant